Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Alienware Aurora Ryzen Edition Service Manual

Installing the wireless card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

CAUTION: To avoid damage to the wireless mini-card, do not place any cables under it.

About this task

The following images indicate the location of the wireless card and provides a visual representation of the installation procedure.

Image: Installing the wireless card

Steps

  1. Connect the antenna cables to the wireless card.
    The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
    Table 1. Antenna-cable color schemeThe table provides the antenna-cable color scheme for the wireless card supported by your computer.
    Connectors on the wireless cardAntenna-cable color
    Main (white triangle)White
    Auxiliary (black triangle)Black
  2. Place the wireless-card bracket on the wireless card.
  3. Align the notch on the wireless card with the tab on the wireless-card slot.
  4. Slide the wireless card at an angle into the wireless-card slot.
  5. Replace the screw (M2x4) that secures the wireless card to the system board.

Next steps

  1. Install the single-graphics card or dual-graphics card, as applicable.
  2. Install the left-side cover.
  3. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\