Alienware m17 R4 Service Manual

Installing the speakers

1. Using the alignment posts, place the left speaker on the palm-rest assembly.
   NOTE Ensure that the alignment posts on the palm-rest and keyboard assembly are threaded through the rubber grommets on the speaker.

   NOTE If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place before replacing the speakers.
2. Route the speaker cable through the routing guides on the palm-rest assembly.
3. Using the alignment posts, place the right speaker on the palm-rest assembly.
   NOTE Ensure that the alignment posts on the palm-rest and keyboard assembly are threaded through the rubber grommets on the speaker.

   NOTE If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place before replacing the speakers.
4. Connect the speaker cable to the right I/O-board.