Chromebook 11 3189 Disassembly and Reassembly Guide - For use by Dell Certified Technicians only

Removing base cover

1. Follow the procedure in Before working inside your computer.
2. Remove the microSD card.
3. To remove the base cover:
   1. Remove the mylar cap [1].
      NOTE The screw cover on the base cover is made up of a mylar sticker. To remove this screw, use a regular philips driver and puncture the mylar cover. Once the mylar caps are removed it cannot replaced, and the screws will be exposed from that point forward.
   2. Loosen the M2.5x7 captive screws that secure the base cover to the computer [2] .
      
   3. Pry the base cover from the edge.
      NOTE You may need a 3c plastic scribe to pry the base cover from the edge.
4. Lift the base cover away from the computer.