- Notes, cautions, and warnings
- Preface
- Introduction
- Getting Started
- Configuring and Managing Storage and Applications
- Configuring and Managing Multiple Network Links for CyberSense
- Configuring and Managing Policies and Copies
- Managing Reports
- Monitoring
- Performing a NetWorker Recovery with Cyber Recovery
- Performing an Avamar Recovery with Cyber Recovery
- Recovering Avamar data
- Preparing the production-side Avamar system
- Checklist for Cyber Recovery with Avamar
- Creating the Avamar DD Boost account and UID for Cyber Recovery
- Initiating an Avamar recovery in the Cyber Recovery UI
- Performing manual steps for Avamar recovery
- Cleaning up after an Avamar recovery
- Performing a PowerProtect Data Manager Recovery with Cyber Recovery
- Recovering PowerProtect Data Manager data
- Meeting prerequisites for a PowerProtect Data Manager recovery
- Initiating a PowerProtect Data Manager recovery in the Cyber Recovery UI
- Running a PowerProtect Data Manager recovery check
- Cleaning up after a PowerProtect Data Manager recovery
- Performing postrecovery steps for a PowerProtect Data Manager recovery
- Administration
- Administration overview
- Manually securing and releasing the Cyber Recovery vault
- Managing users
- Managing login sessions
- Setting up an email server
- Managing Cyber Recovery password expiration
- Resetting Cyber Recovery passwords
- Resetting the IP address on the management host
- Changing the network gateway on the Cyber Recovery server
- Updating the SSL security certificate
- Configuring a daily activity report
- Configuring a telemetry report
- Changing time zones
- Changing the log level
- Collecting logs for upload to support
- Log file rotation
- Protecting the Cyber Recovery configuration
- Retrieving your preserved Cyber Recovery configuration
- Setting up a maintenance schedule
- Cyber Recovery disaster recovery
- Troubleshooting
Dell PowerProtect Cyber Recovery 19.13 Product Guide
Configuring a telemetry report
Set up a Cyber Recovery telemetry report that is sent to Dell Technologies for troubleshooting purposes.
Prerequisites
- You have a valid email address.
- The mail server is enabled. For more information, see Setting up an email server.
NOTE:The
Cyber Recovery software can generate and send a telemetry report without user authentication settings for an external mail server. However, we recommend that you include authentication settings for an external mail server.
About this task
The telemetry report provides information about Cyber Recovery components, such as:
- Policies
- Applications
- Cyber Recovery versions for installations and updates
- Cyber Recovery services
- Vault DD storage
- Mail server
To run a telemetry report on demand, use the CRCLI. For information about the CRCLI, see the Dell PowerProtect Cyber Recovery Command-Line Interface Reference Guide.
Steps
- From the Masthead Navigation, click
to access the
System Settings list.
- Click System Reports.
- In the System Reports dialog box, click the Telemetry Report tab.
- Swipe right on the slider to enable the option.
- Complete the
Frequency and
Next Run
fields, and then click
Save.
NOTE:The Cyber Recovery UI uses the same time zone as the Cyber Recovery management host for the scheduled time.The maximum number of days is 30, and the minimum is 1 day.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\