- Notes, cautions, and warnings
- Preface
- Introduction
- Getting Started
- Configuring and Managing Storage and Applications
- Configuring and Managing Multiple Network Links for CyberSense
- Configuring and Managing Policies and Copies
- Managing Reports
- Monitoring Cyber Recovery components
- Performing a NetWorker Recovery with Cyber Recovery
- Performing an Avamar Recovery with Cyber Recovery
- Recovering Avamar data
- Preparing the production-side Avamar system
- Checklist for Cyber Recovery with Avamar
- Creating the Avamar DD Boost account and UID for Cyber Recovery
- Initiating an Avamar recovery in the Cyber Recovery UI
- Performing manual steps for Avamar recovery
- Cleaning up after an Avamar recovery
- Performing a PowerProtect Data Manager Recovery with Cyber Recovery
- Recovering PowerProtect Data Manager data
- Meeting prerequisites for a PowerProtect Data Manager recovery
- Initiating a PowerProtect Data Manager recovery in the Cyber Recovery UI
- Running a PowerProtect Data Manager recovery check
- Cleaning up after a PowerProtect Data Manager recovery
- Performing postrecovery steps for a PowerProtect Data Manager recovery
- Administration
- Administration overview
- Manually securing and releasing the Cyber Recovery vault
- Managing users
- Managing login sessions
- Configure mail server support
- Managing Cyber Recovery password expiration
- Resetting Cyber Recovery passwords
- Resetting the IP address on the management host
- Changing the network gateway on the Cyber Recovery server
- Updating the SSL security certificate
- Changing time zones
- Changing the log level
- Collecting logs for upload to support
- Configuring a telemetry report
- Log file rotation
- Protecting the Cyber Recovery configuration
- Retrieving your preserved Cyber Recovery configuration
- Setting up a maintenance schedule
- Cyber Recovery disaster recovery
- Troubleshooting
Dell PowerProtect Cyber Recovery 19.14 Product Guide
Recovering NetWorker data
Use a point-in-time (PIT) copy to rehydrate NetWorker data in the Cyber Recovery vault.
The NetWorker application must be added as the root user in the Cyber Recovery vault. The Cyber Recovery software uses NetWorker commands such as nsrdr, which require root permissions.
Before a recovery operation, run application and server backups in the production environment. Then, perform a Secure Copy policy operation to copy data to the Cyber Recovery vault environment.
NOTE:To recover a backup application from a
Cyber Recovery copy properly, ensure that your replication window start time is after the application backup on the production system is completed, including the required metadata backup. For an intermediate replication on the production system, ensure that the intermediate replication start time is also after the production backup completion time.
From the Cyber Recovery UI, initiate a recovery.
NOTE:You can only run one recovery job per application at a time.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\