Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Chassis Management Controller Version 6.0 for PowerEdge M1000e User’s Guide

PDF

Interpreting LED Colors and Blinking Patterns

The LEDs on the chassis provide the following component status:

  • Steadily glowing, green LEDs indicate that the component is powered on. If the green LED is blinking, it indicates a critical but routine event, such as a firmware upload, during which the unit is not operational. It does not indicate a fault.
  • A blinking amber LED on a module indicates a fault on that module.
  • Blue, blinking LEDs are configurable by the user and used for identification. For more information about configuration, see Downloading SNMP Management Information Base (MIB) File.
Table 1. LED Color and Blinking PatternsThe following table describes the color and blinking patterns of the chassis LEDs.
Component LED Color, Blinking Pattern Status
CMC Green, glowing steadily Powered on
Green, blinking Firmware is being uploaded
Green, dark Powered off
Blue, glowing steadily Active
Blue, blinking User-enabled module identifier
Amber, glowing steadily Not used
Amber, blinking Fault
Blue, dark Standby
iKVM Green, glowing steadily Powered on
Green, blinking Firmware is being uploaded
Green, dark Powered off
Amber, glowing steadily Not used
Amber, blinking Fault
Amber, dark No fault
Server Green, glowing steadily Powered on
Green, blinking Firmware is being uploaded
Green, dark Powered off
Blue, glowing steadily Normal
Blue, blinking User-enabled module identifier
Amber, glowing steadily Not used
Amber, blinking Fault
Blue, dark No fault
IOM (Common) Green, glowing steadily Powered on
Green, blinking Firmware is being uploaded
Green, dark Powered off
Blue, glowing steadily Normal/stack master
Blue, blinking User-enabled module identifier
Amber, glowing steadily Not used
Amber, blinking Fault
Blue, dark No fault/stack slave
IOM (Pass through) Green, glowing steadily Powered on
Green, blinking Not used
Green, dark Powered off
Blue, glowing steadily Normal
Blue, blinking User-enabled module identifier
Amber, glowing steadily Not used
Amber, blinking Fault
Blue, dark No fault
Fan Green, glowing steadily Fan working
Green, blinking Not used
Green, dark Powered off
Amber, glowing steadily Fan type not recognized, update CMC firmware
Amber, blinking Fan fault; tachometer out of range
Amber, dark Not used
PSU (Oval) Green, glowing steadily AC OK
(Oval) Green, blinking Not used
(Oval) Green, dark AC Not OK
Amber, glowing steadily Not used
Amber, blinking Fault
Amber, dark No fault
(Circle) Green, glowing steadily DC OK
(Circle) Green, dark DC Not OK

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\