Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge M1000e Chassis Management Controller Firmware Version 5.1 User’s Guide

PDF

Configuring Management VLAN on IOMs Using RACADM

To configure management VLAN on IOMs using RACADM, use the racadm setniccfg –m switch-n -v command.
  • Specify the VLAN ID and priority of a particular IOM with the following command:
    racadm setniccfg -m switch -<n> -v <VLAN id> <VLAN priority>

    The valid values for <n> are 1 – 6.

    The valid values for <VLAN> are 1 – 4000 and 4021 – 4094. Default is 1.

    The valid values for <VLAN priority> are 0 – 7. Default is 0.

    For example:
    racadm setniccfg -m switch -1 -v 1 7
    For example:
    
                                           
                                        
  • To remove an IOM VLAN, disable the VLAN capabilities of the specified IOM's network:
    racadm setniccfg -m switch-<n> -v

    The valid values for <n> are 1 – 6.

    For example:
    racadm setniccfg -m switch-1 -v

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\