Dell Command Line Reference Guide for the S4048–ON System 9.14.2.5

stack-unit id

Enter the keywords stack-unit then a number to select a particular stack member and then enter one of the following command options to clear a specific collection of data. The range is from 1 to 6.

counters

Enter the keyword counters to clear the counters on the selected stack member.

cpu data-plane statistics

Enter the keywords cpu data-plane statistics to clear the data plane statistics.

cpu i2c statistics

Enter the keywords cpu i2c statistics to clear the i2c devices statistics.

cpu party-bus statistics

Enter the keywords cpu party-bus statistics to clear the management statistics.

cpu sata-interface statistics

Enter the keywords cpu sata-interface statistics to clear the sata interface statistics.

stack-port

Enter the keywords stack-port then the port number of the stacking port to clear the statistics of the particular stacking port. The range is from 1 to 72.

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Increased the stacking range to 12 units in S3100 series.

9.10(0.0)

Introduced on the S6100-ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.0

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the S-Series.

• show hardware stack-unit — display the data plane or management plane input and output statistics of the designated component of the designated stack member.