Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

show vrrp

Displays VRRP group information.

Syntax
show vrrp [vrf vrf-name] {brief | vrrp-id | ipv6 group-id}
Parameters
  • vrf vrf-name — Displays the VRRP group information corresponding to the specified VRF.
  • brief — Displays the configuration information for all VRRP instances in the system.
  • vrrp-id — Enter a VRRP group ID number to view the VRRP IPv4 group operational status information, from 1 to 255.
  • ipv6 group-id — (Optional) Enter a VRRP group ID number to view the specific IPv6 group operational status information, from 1 to 255.
Default
All IPv4 VRRP group configuration
Command Mode
EXEC
Usage Information
Displays all active VRRP groups. If no VRRP groups are active, the system displays No Active VRRP group.
Example (Brief)
OS10 # show vrrp brief
Interface     Group Priority Preemption State    Master-addr Virtual addr(s)
---------------------------------------------------------------------
ethernet1/1/1 1     200      true      master-state 10.1.1.1  10.1.1.1 
Example (IPv6)
OS10 # show vrrp ipv6 1
Interface : ethernet1/1/1    IPv6 VRID : 1
Primary IP Address : 10::1    State : master-state
Virtual MAC Address : 00:00:5e:00:02:01
Version : version-3    Priority : 200
Preempt :     Hold-time :
Authentication : no-authentication
Virtual IP address :
10::1
master-transitions : 1    advertise-rcvd : 0
advertise-interval-errors : 0    ip-ttl-errors : 0
priority-zero-pkts-rcvd : 0    priority-zero-pkts-sent : 0
invalid-type-pkts-rcvd : 0    address-list-errors : 0
pkt-length-errors : 0 
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\