Dell EMC OpenManage Enterprise 3.9 Support Matrix

Supported agents and interfaces

Lists the Dell EMC system agents and interfaces supported in this version of OpenManage Enterprise.

Table 1. Supported agents and interfaces
NOTE For more information about the agents and interfaces, see their product documentation on the Dell support site.
Agent or interface	Supported version
Dell Chassis Management Controller (CMC)	PowerEdge M1000e chassis—`6.20` and later versions. PowerEdge VRTX chassis—`3.21` and later versions. PowerEdge FX2 and FX2s sleds—`2.21` and later versions.
Dell EMC OpenManage Enterprise Modular Edition	For the PowerEdge MX7000 chassis—`1.2` and later versions.
iDRAC9	All YX4X (14G) and YX5X (15G) PowerEdge servers: iDRAC `4.20.xx.xx` and later versions
iDRAC7 and iDRAC8	For the YX2X (12G) PowerEdge servers with iDRAC7 — `2.65.xx.xx` and later versions. For the YX3X (13G) PowerEdge servers with iDRAC8 — `2.70.xx.xx` and later versions. NOTE Ensure that Express or Enterprise licenses are available to perform firmware updates.
iDRAC6	All YX1X (11G) PowerEdge servers: For the monolithic systems — `1.98` and later versions. For the modular systems — `3.65` and later versions.
Dell EMC Repository Manager	`3.0` and later versions.
Networking OS	`9.13.0.0, 9.14.0.0, 10.5.0.0` and later versions, except for: Dell Networking Z9000 — `9.7P19` and later versions. Networking OS switches MX5108N, MX9116N—minimum firmware version `10.5` (OS 10). NOTE For a complete list of supported networking devices, refer to Networking device support.