Dell OpenManage SNMP Reference Guide for iDRAC and Chassis Management Controller

PDF

Trap Variables

This section lists the six variables that are sent with iDRAC traps to provide additional information about a trap or alert generated by some event on the system. The trap variables presented here apply to all iDRAC7 and iDRAC8 traps. The trap variables are sent in the order listed and are reserved for use only in traps.

Table 1. Alert Message ID
Variable Name	`alertMessageID`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.1.0
Description	Message ID of the event.
Syntax	DisplayString
Access	Read-only

Table 2. Alert Message
Variable Name	`alertMessage`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.2.0
Description	Message describing the alert.
Syntax	StringType
Access	Read-only

Table 3. Alert Current Status
Variable Name	`alertCurrentStatus`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.3.0
Description	Current status of object causing the alert, if applicable.
Syntax	ObjectStatusEnum
Access	Read-only

Table 4. Alert System Service Tag
Variable Name	`alertSystemServiceTag`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.4.0
Description	Service tag of the system.
Syntax	DisplayString
Access	Read-only

Table 5. Alert System FQDN
Variable Name	`alertSystemFQDN`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.5.0
Description	Fully qualified domain name of the system.
Syntax	StringType
Access	Read-only

Table 6. Alert FQDD
Variable Name	`alertFQDD`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.6.0
Description	Fully qualified device descriptor of the device.
Syntax	DisplayString
Access	Read-only

Table 7. Alert Device Display Name
Variable Name	`alertDeviceDisplayName`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.7.0
Description	Display name of the device/FQDD
Syntax	DisplayString
Access	Read-only

Table 8. Alert Message Arguments
Variable Name	`alertMessageArguments`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.8.0
Description	Concatenated set of strings representing the message arguments of the event. Each message argument string is enclosed in double quotes, and there is a comma after the ending double quote of each message argument string, except the last one. Any double quotes found within a message argument string are preprocessed and changed to single quotes.
Syntax	StringType
Access	Read-only

Table 9. Alert Chassis Service Tag
Variable Name	`alertChassisServiceTag`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.9.0
Description	For modular systems, the service tag of the enclosing chassis. For rack and tower systems, this varbind will be empty (zero length).
Syntax	DisplayString
Access	Read-only

Table 10. Alert Chassis Name
Variable Name	`alertChassisName`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.10.0
Description	For modular systems, the chassis name of the enclosing chassis. For rack and tower systems, this varbind will be empty (zero length).
Syntax	DisplayString
Access	Read-only

Table 11. Alert Rac FQDN
Variable Name	`alertRacFQDN`
Object ID	1.3.6.1.4.1.674.10892.5.3.1.11.0
Description	Fully qualified domain name of the remote access card.
Syntax	StringType
Access	Read-only