Server Administrator Version 8.5 Messages Reference Guide

Table below lists in alphabetical order each line item that may appear in the event description.

Description Line Item

Action performed was: <Action>

Explanation

Specifies the action that was performed, for example: Action performed was: Power cycle

Description Line Item

Action requested was: <Action>

Explanation

Specifies the action that was requested, for example: Action requested was: Reboot, shutdown OS first

Description Line Item

Additional Details: <Additional details for the event>

Explanation

Specifies additional details available for the hot plug event, for example: Memory device: DIMM1_A Serial number: FFFF30B1

Description Line Item

<Additional power supply status information>

Explanation

Specifies information pertaining to the event, for example: Power supply input AC is off, Power supply POK (power OK) signal is not normal, Power supply is turned off

Description Line Item

Chassis intrusion state: <Intrusion state>

Explanation

Specifies whether the chassis intrusion state is Open or Closed. For example: Chassis intrusion state: Open

Description Line Item

Chassis location: <Name of chassis>

Explanation

Specifies name of the chassis that generated the message, for example: Chassis location: Main System Chassis

Description Line Item

Configuration error type: <type of configuration error>

Explanation

Specifies the type of configuration error that occurred, for example: Configuration error type: Revision mismatch

Description Line Item

Current sensor value (in Amps): <Reading>

Explanation

Specifies the current sensor value in amps, for example: Current sensor value (in Amps): 7.853

Description Line Item

Date and time of action: <Date and time>

Explanation

Specifies the date and time the action was performed, for example: Date and time of action: Sat Jun 12 16:20:33 2004

Description Line Item

Device location: <Location in chassis>

Explanation

Specifies the location of the device in the specified chassis, for example: Device location: Memory Card A

Description Line Item

Discrete current state: <State>

Explanation

Specifies the state of the current sensor, for example: Discrete current state: Good

Description Line Item

Discrete temperature state: <State>

Explanation

Specifies the state of the temperature sensor, for example: Discrete temperature state: Good

Description Line Item

Discrete voltage state: <State>

Explanation

Specifies the state of the voltage sensor, for example: Discrete voltage state: Good

Description Line Item

Fan sensor value: <Reading>

Explanation

Specifies the fan speed in revolutions per minute (RPM) or On/Off, for example: Fan sensor value (in RPM): 2600

Fan sensor value: Off

Description Line Item

Log type: <Log type>

Explanation

Specifies the type of hardware log, for example: Log type: ESM

Description Line Item

Memory device bank location: <Bank name in chassis>

Explanation

Specifies the name of the memory bank in the system that generated the message, for example: Memory device bank location: Bank_1

Description Line Item

Memory device location: <Device name in chassis>

Explanation

Specifies the location of the memory module in the chassis, for example: Memory device location: DIMM_A

Description Line Item

Number of devices required for full redundancy: <Number>

Explanation

Specifies the number of power supply or cooling devices required to achieve full redundancy, for example: Number of devices required for full redundancy: 4

Description Line Item

Peak value (in Watts):<Reading>

Explanation

Specifies the peak value in Watts, for example: Peak value (in Watts): 1.693

Description Line Item

Possible memory module event cause: <list of causes>

Explanation

Specifies a list of possible causes for the memory module event, for example: Possible memory module event cause:

Single bit warning error rate exceeded

Single bit error logging disabled

Description Line Item

Power Supply type: <type of power supply>

Explanation

Specifies the type of power supply, for example: Power Supply type: VRM

Description Line Item

Previous redundancy state was: <State>

Explanation

Specifies the status of the previous redundancy message, for example: Previous redundancy state was: Lost

Description Line Item

Previous state was:<State>

Explanation

Specifies the previous state of the sensor, for example: Previous state was: OK (Normal)

Description Line Item

Processor sensor status: <status>

Explanation

Specifies the status of the processor sensor, for example: Processor sensor status: Configuration error

Description Line Item

Redundancy unit: <Redundancy location in chassis>

Explanation

Specifies the location of the redundant power supply or cooling unit in the chassis, for example: Redundancy unit: Fan Enclosure

Description Line Item

SD card device type: <Type of SD card device>

Explanation

Specifies the type of SD card device, for example: SD card device type: Hypervisor

Description Line Item

SD card state: <State of SD card>

Explanation

Specifies the state of the SD card, for example: SD card state: Present, Active

Description Line Item

Sensor location: <Location in chassis>

Explanation

Specifies the location of the sensor in the specified chassis, for example: Sensor location: CPU1

Description Line Item

Temperature sensor value: <Reading>

Explanation

Specifies the temperature in degrees Celsius, for example: Temperature sensor value (in degrees Celsius): 30

Description Line Item

Voltage sensor value (in Volts):<Reading>

Explanation

Specifies the voltage sensor value in volts, for example: Voltage sensor value (in Volts): 1.693