Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OpenManage Server Update Utility 版本 15.09.00

解决硬件前提条件检查失败问题

当以 GUI 模式启动 Dell OpenManage Server Update Utility (SUU) 而硬件组件的前提条件检查失败时,先安装作为前提条件的硬件,然后再继续升级、降级或更新组件。与系统内存利用率相关的 Dell DUP HDD 固件更新公用程序要求服务器最少具有 8GB 到 16GB 的 RAM。

要安装硬件前提条件,请执行以下步骤:
  1. 使用 Prerequisites 介质启动系统以达到前提条件级别。
    • 注: 在系统 BIOS 中设置引导顺序以使介质驱动器置于系统硬盘驱动器的前面。
  2. 如果系统不能满足前提条件,请使用 Prerequisites 介质重新启动系统。
    • 注: 可能需要再次重新启动以完成前提条件更新。在屏幕信息提示移除该介质之前,切勿将其移除。
  3. 出现提示时,用 Dell Server Updates 介质更换 Prerequisites 介质并重新引导系统。

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\