Dell Command Line Reference Guide for the S4048–ON System 9.14.2.4

To return to the default values, use the no default-information originate command.

always

(OPTIONAL) Enter the keyword always to specify that default route information must always be advertised.

metric metric-value

(OPTIONAL) Enter the keyword metric then a number to configure a metric value for the route. The range is from 1 to 16777214.

metric-type type-value

(OPTIONAL) Enter the keywords metric-type then an OSPF link state type of 1 or 2 for default routes. The values are:

• 1 = Type 1 external route
• 2 = Type 2 external route

route-map map-name

(OPTIONAL) Enter the keywords route-map then the name of an established route map.

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Added support for the Multi-Process OSPF.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

pre- 6.1.1.1

Introduced on the E-Series.

• redistribute — redistributes routes from other routing protocols into OSPF.