Dell Command Line Reference Guide for the S4048–ON System 9.14.2.4

To return to default values, use the no distance bgp command.

external-distance

Enter a number to assign to routes learned from a neighbor external to the AS. The range is from 1 to 255. The default is 20.

internal-distance

Enter a number to assign to routes learned from a router within the AS. The range is from 1 to 255. The default is 200.

local-distance

Enter a number to assign to routes learned from networks listed in the network command. The range is from 1 to 255. The default is 200.

• external-distance = 20
• internal-distance = 200
• local-distance = 200

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.2(1.0)

Introduced on the Z9500.

8.3.19.0

Introduced on the S4820T.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the S-Series.

7.7.1.0

Introduced on the C-Series.

The higher the administrative distance assigned to a route means that your confidence in that route is low. Routes assigned an administrative distance of 255 are not installed in the routing table. Routes from confederations are treated as internal BGP routes.

• router bgp — enter ROUTER mode on the switch.