Dell Command Line Reference Guide for the S4048–ON System 9.14.2.4

To return to the default values, use the no redistribute bgp command with the appropriate parameters.

AS number

Enter a number that corresponds to the autonomous system number. The range is from 1 to 65355.

level-1

(OPTIONAL) Routes are independently redistributed into IS-IS Level 1 routes only.

level-1-2

(OPTIONAL) Routes are independently redistributed into IS-IS Level 1 and Level 2 routes.

level-2

(OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes only. This setting is the default.

metric metric-value

(OPTIONAL) The value used for the redistributed route. Use a metric value that is consistent with the destination protocol. The range is from 0 to 16777215. The default is 0.

metric-type {external| internal}

(OPTIONAL) The external link type associated with the default route advertised into a routing domain. The two options are:

• external
• internal

route-map map-name

map-name is an identifier for a configured route map. The route map filters imported routes from the source routing protocol to the current routing protocol.

If you do not specify a map-name, all routes are redistributed. If you specify a keyword, but fail to list route map tags, no routes are imported.

• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100–ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.5(0.1)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.12.0

Introduced on the S4810.

7.5.1.0

Added support for IPv6 ISIS.

6.3.1.0

Introduced.

DellEMC(conf)# router is
DellEMC(conf-router_isis)# redistribute bgp 1 level-1 metric 32 metric-type
external route-map rmap-isis-to-bgp
DellEMC(conf-router_bgp)#show running-config isis
!
router isis
redistribute bgp 1 level-1 metric 32 metric-type external route-map
rmap-isis-to-bgp