Dell Command Line Reference Guide for the S4048–ON System 9.14.2.4

interface

Enter one of the following keywords and the interface information:

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

mac-address

(Optional) MAC address of a supplicant.

• EXEC
• EXEC privilege

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

9.0.0.0

Introduced on the Z9000.

8.3.19.0

Introduced on the S4820T.

8.3.12.0

Introduced on the S4810.

8.3.11.1

Introduced on the Z9000.

8.4.2.1

Added the mac-address option on the C-Series and S-Series.

7.6.1.0

Introduced on the C-Series, E-Series, and S-Series.

If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X configuration details (Port Authentication status, Untagged VLAN ID, Authentication PAE state, and Backend state) display for each supplicant, as shown in the following example.

DellEMC# show dot1x interface tengigabitethernet 1/32

802.1x information on Te 1/32:
-----------------------------
Dot1x Status:             Enable
Port Control:             AUTO
Port Auth Status:         AUTHORIZED(MAC-AUTH-BYPASS)
Re-Authentication:        Disable
Untagged VLAN id:         400
Guest VLAN:               Enable
Guest VLAN id:            100
Auth-Fail VLAN:           Disable
Auth-Fail VLAN id:        NONE
Auth-Fail Max-Attempts:   NONE
Mac-Auth-Bypass:          Enable
Mac-Auth-Bypass Only:     Enable
Tx Period:                3 seconds
Quiet Period:             60 seconds
ReAuth Max:               2
Supplicant Timeout:       30 seconds
Server Timeout:           30 seconds
Re-Auth Interval:         3600 seconds
Max-EAP-Req:              2
Host Mode:                SINGLE_HOST
Auth PAE State:           Authenticated
Backend State:            Idle
DellEMC#

DellEMC# show dot1x interface tengigabitethernet 1/32 mac-address 00:00:00:00:00:10
Supplicant Mac: 0 0 0 0 0 10 Lookup for Mac:

802.1x information on Te 1/32:
-----------------------------
Dot1x Status:             Enable
Port Control:             AUTO
Re-Authentication:        Disable
Guest VLAN:               Enable
Guest VLAN id:            100
Auth-Fail VLAN:           Disable
Auth-Fail VLAN id:        NONE
Auth-Fail Max-Attempts:   NONE
Mac-Auth-Bypass:          Enable
Mac-Auth-Bypass Only:     Enable
Tx Period:                3 seconds
Quiet Period:             60 seconds
ReAuth Max:               2
Supplicant Timeout:       30 seconds
Server Timeout:           30 seconds
Re-Auth Interval:         3600 seconds
Max-EAP-Req:              2
Host Mode:                MULTI_AUTH
Max-Supplicants:          128

Port status and State info for Supplicant: 00:00:00:00:00:10

Port Auth Status:         AUTHORIZED(MAC-AUTH-BYPASS)
Untagged VLAN id:         400
Auth PAE State:           Authenticated
Backend State:            Idle
DellEMC#

DellEMC# show dot1x interface tengigabitethernet 1/32 mac-address 00:00:00:00:00:11
Supplicant Mac: 0 0 0 0 0 10 Lookup for Mac:

802.1x information on Te 1/32:
-----------------------------
Dot1x Status:             Enable
Port Control:             AUTO
Re-Authentication:        Disable
Guest VLAN:               Enable
Guest VLAN id:            100
Auth-Fail VLAN:           Disable
Auth-Fail VLAN id:        NONE
Auth-Fail Max-Attempts:   NONE
Mac-Auth-Bypass:          Enable
Mac-Auth-Bypass Only:     Enable
Tx Period:                3 seconds
Quiet Period:             60 seconds
ReAuth Max:               2
Supplicant Timeout:       30 seconds
Server Timeout:           30 seconds
Re-Auth Interval:         3600 seconds
Max-EAP-Req:              2
Host Mode:                MULTI_AUTH
Max-Supplicants:          128

Port status and State info for Supplicant: 00:00:00:00:00:11

Port Auth Status:         AUTHORIZED(GUEST-VLAN)
Untagged VLAN id:         100
Auth PAE State:           Authenticated
Backend State:            Idle
DellEMC#