Dell Command Line Reference Guide for the S4048–ON System 9.14.2.4

show hardware forwarding-table mode

Display the hardware forwarding table mode in the current boot and in the next boot.

Syntax

show hardware forwarding-table mode

Defaults

none

Command Modes

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC Networking OS Command Line Reference Guide.

The following is a list of the Dell EMC Networking OS version history for this command.

Version

Description

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.7(0.0)

Introduced on the S6000, S6000-ON, and Z9500 switch.

Example

DellEMC#show hardware forwarding-table mode 

                     Current Settings            Next Boot Settings
Mode              :  Default                     scaled-l3-hosts
L2 MAC Entries    :  160K                         96K
L3 Host Entries   :  144K                        208K
L3 Route Entries  :   16K                         16K

DellEMC#

Related Commands

hardware forwarding-table mode — selects the mode to initialize the maximum scalability size for L2 MAC table or L3 Host table or L3 Route table.