Dell Command Line Reference Guide for the S4048–ON System 9.14.2.6

vrf vrf-name

(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure this setting on that VRF.

NOTE Applies to specific VRF if input is provided, else applies to Default VRF.

group

(OPTIONAL) Enter the multicast group address in the form A.B.C.D to display the list of sources to which this group is mapped.

• EXEC
• EXEC Privilege

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100–ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Added support for VRF. Introduced on the S6000-ON.

9.5(0.1)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the C-Series and S-Series.

7.7.1.0

Introduced on the E-Series.

DellEMC# show ip igmp ssm-map
Interface                  Vlan 20
Group                         232.1.1.5
Uptime                      00:11:22
Expires                       Never
Router mode           INCLUDE
Last reporter            35.0.0.2
Group source list
Source address          Expires
65.0.0.1                         00:01:22
65.0.0.2                         00:01:22
65.0.0.3                         00:01:22
65.0.0.4                         00:01:22
65.0.0.5                         00:01:22

• ip igmp ssm-map — use a statically configured list to translate (*,G) memberships to (S,G) memberships.