Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

源接口配置

您可以将接口配置为 sFlow 的源。SFlow 代理使用配置的源接口的 IP 地址作为代理 IP 地址。

  • 在 CONFIGURATION 模式下配置源接口。
    sflow source-interface {ethernet node/slot/port[:subport] | loopback loopback-ID| port-channel port-channel-ID| vlan vlan-ID}
  • 查看接口详情。
    show running-configuration sflow
    show sflow
    
配置 sFlow 源接口
OS10(config)# sflow source-interface ethernet 1/1/1

OS10(config)# sflow source-interface port-channel 1

OS10(config)# sflow source-interface loopback 1

OS10(config)# sflow source-interface vlan 10

查看 sFlow 运行的配置
OS10# show running-configuration sflow
sflow enable all-interfaces
sflow source-interface vlan10
sflow collector 5.1.1.1 agent-addr 4.1.1.1 6343
sflow collector 6.1.1.1 agent-addr 4.1.1.1 6343

OS10(config)#show running-configuration interface vlan
!
interface vlan1
 no shutdown
!
interface vlan10
 no shutdown
 ip address 10.1.1.1/24
查看 sFlow 详情
OS10# show sflow
sFlow services are enabled
Management Interface sFlow services are disabled
Global default sampling rate: 32768
Global default counter polling interval: 30
Global default extended maximum header size: 128 bytes
Global extended information enabled: none
2 collector(s) configured
Collector IP addr:5.1.1.1 Agent IP addr:10.1.1.1 UDP port:6343 VRF:Default → It shows active agent-ip
Collector IP addr:6.1.1.1 Agent IP addr:10.1.1.1 UDP port:6343 VRF:Default → It shows active agent-ip
2 UDP packets exported
0 UDP packets dropped
2 sFlow samples collected


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\