Me and My Dell For Inspiron, G-Series, XPS, and Alienware computers

Beep codes

Your computer may emit a series of beeps during start-up if there are errors or problems. This series of beeps, called a beep code, identifies a problem. If this occurs, note the beep code and contact Dell for assistance.

NOTE Some of the beep codes mentioned in the table below may not apply to your computer.

Table 1. Beep codes and possible problemsThis table provides a list of the beep codes and possible problems.
Beep codes	Possible problems
One	Possible system board failure—BIOS ROM checksum failure.
Two	No RAM detected NOTE If you installed or replaced the memory module, ensure that the memory module is seated properly.
Three	Possible system board failure—Chipset error
Four	RAM read/write failure
Five	Real‑time Clock failure
Six	Video card or video controller failure
Seven	Processor failure NOTE This beep code is supported for computers with Intel processor only.
Eight	Display failure