- Notes, cautions, and warnings
- Setting up your computer
- About your computer
- Using your computer
- Ports and connectors
- Software and Applications
- Restoring your operating system
- Troubleshooting
- BIOS
- Getting help and contacting Dell
- References
If a component fails the test, the test stops, the computer beeps, and an error code is displayed. Note the error code(s) and search for solutions at www.dell.com/support or Contact Dell.
Follow the instructions on the screen to continue to the next test, retest the component that failed, or stop the test and restart the computer.
If the PSA completes successfully, the following message appears on your screen: No problems have been found with this system so far. Do you want to run the remaining memory tests? This will take about 30 minutes or more. Do you want to continue? (Recommended).
Press <y> to continue if you are experiencing memory issue, otherwise press <n> to finish the test.
If the ePSA completes with errors, the following message appears on your screen: Testing completed. One or more errors were detected.
The Event Log tab in the Status window displays the errors that occurred during the ePSA tests.