- Notes, cautions, and warnings
- Introduction
- Preinstallation setup
- Installing iDRAC Service Module
- Initial installation of iDRAC Service Module through iDRAC Enterprise or Datacenter or iDRAC Express on Microsoft Windows and Linux
- Installing iDRAC Service Module on Microsoft Windows operating systems
- Silent installation of iDRAC Service Module on Microsoft Windows
- Modifying iDRAC Service Module components on Microsoft Windows operating systems
- Repairing iDRAC Service Module running on Microsoft Windows operating systems
- Uninstalling iDRAC Service Module running on Microsoft Windows operating systems
- Installing the iDRAC Service Module on VMware ESXi
- Installing iDRAC Service Module on supported Linux operating systems
- Installing iDRAC Service Module when System Configuration Lock Down Mode is enabled in iDRAC
- Configuring iDRAC Service Module
- Security configurations and compatibility
- iSM monitoring features
- S.M.A.R.T monitoring
- Operating system information
- Lifecycle Controller log replication into operating system
- Automatic system recovery
- Windows Management Instrumentation Providers
- Prepare to remove a NVMe PCIe SSD device
- Remote iDRAC hard reset
- iDRAC access via Host OS
- Accessing iDRAC via GUI, WS-Man, Redfish, and Remote RACADM
- In-Band support for iDRAC SNMP alerts
- Enable WS-Man remotely
- Autoupdating iSM
- FullPowerCycle
- SupportAssist on the box
- Configuring the In-Band SNMP Get feature—Linux
- Configuring the In-Band SNMP Get feature—Windows
- iDRAC GUI Launcher
- Single sign-on (SSO) to iDRAC UI from host operating system administrators desktop
- IPv6 communication between iSM and iDRAC over OS-BMC Passthru
- Frequently asked questions
- Linux and Ubuntu installer packages
- Resources and support
- Contacting Dell EMC
Dell EMC iDRAC Service Module 3.6 User’s Guide
Support for iDRAC URI to get iDRAC Service Module installer
You can download iSM web packages using the following URL:https:// <iDRACIP>/software/ism/package.xml. You can download the packages only when iSM LC DUP is uploaded and available in iDRAC. You can also load it in iDRAC by enabling the iDRAC LC autoupdate.
The following is a sample XML code with an Image filename mentioned to download the package.
<PayloadConfiguration> <Image filename="OM-iSM-Dell-Web-LX-3.6.0.tar.gz" id="5DD5A8BA-1958-4673-BE77-40B69680AF5D" skip="false" type="APAC" version="3.6.0"/> <Image filename="OM-iSM-Dell-Web-LX-3.6.0.tar.gz.sign" id="E166C545-82A9-4D5D-8493-B834850F9C7A" skip="false" type="APAC" version="3.6.0"/> <Image filename="OM-iSM-Dell-Web-X64-3.6.0.exe" id="5015744F-F938-40A8-B695-5456E9055504" skip="false" type="APAC" version="3.6.0"/> <Image filename="ISM-Dell-Web-3.6.0-VIB-ESX6i-Live.zip" id="1F3A165D-7380-4691-A182-9D9EE0D55233" skip="false" type="APAC" version="3.6.0"/> <Image filename="RPM-GPG-KEY-dell" id="0538B4E9-DA4D-402A-9D96-A4A55EE2234C" skip="false" type="APAC" version=""/> <Image filename="sha256sum" id="06F61B54-58E2-41FB-8CE3-B7137A60E4B7" skip="false" type="APAC" version=""/> </PayloadConfiguration>
To download the packages, use the image filename present in the XML code to append to the URL. For example:
- Microsoft Windows web packages can be downloaded from https://<iDRACIP>/software/ism/OM-iSM-Dell-Web-X64–3.6.0.exe.
VMware ESXi Live VIB package from Lifecycle Controller can be downloaded fromhttps://<iDRACIP>/software/ism/ISM-Dell-Web-3.6.0-VIB-ESX6i-Live.zip.
Red Hat Enterprise Linux web pack can be downloaded from https://<iDRACIP>/software/ism/OM-iSM-Dell-Web-LX-3.6.0.tar.gz.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\