Dell EMC iDRAC Service Module 4.1.0.0 Release Notes

Common limitations

The following limitations are applicable to all the operating systems.

Table 1. Common limitations
Issue ID	Functional area	Description	Workaround
158667 159019 158514 158740	Interruption in communication between iDRAC and iSM.	When the workload on the host increases due to intensive task requests by the processor, the communication between iDRAC Service Module and iDRAC is interrupted for a moment and restored automatically.	Not applicable
Not available	Communication between iSM and iDRAC is not established.	When Federal Information Processing Standards (FIPS) mode is enabled either on the host operating system or iDRAC, communication between iSM and iDRAC is not established.	Not applicable
Not available	iSM Host SNMP OMSA alert	iSM Host SNMP OMSA alert is enabled, even when the parent iSM Host SNMP alert is disabled.	To disable the iSM Host SNMP OMSA alert feature, first you must enable the parent iSM Host SNMP alert and then disable the child iSM Host SNMP OMSA alert feature. The iSM Host SNMP OMSA alert feature can be disabled using one of the following options: RACADM interface iSM installer for operating system, where it is supported.
Not available	iDRAC to OMSA SNMP alert mapping	iDRAC to OMSA SNMP alert mapping is enabled when OMSA is running.	To disable iSM Host SNMP OMSA alert, restart the iDRAC Service Module.