iDRAC9 with Lifecycle Controller Version 3.16.16.16 Release Notes

Installation instructions

• From the Windows host operating system (managed node), run the Dell Update Package for Windows and follow the instructions on the update wizard.
• From the Linux host operating system (managed node), run the Dell Update Package for Linux from the shell prompt. Follow the instructions displayed on the console.
• From the management station, remotely update the firmware using the iDRAC web interface:
  1. Extract the firmware image self-extracting file to the management station.
  2. Open the iDRAC web interface using a supported web browser.
  3. Log in as an administrator.
  4. Go to Maintenance > System Update. The Manual Update page is displayed.
  5. Select Local to upload the firmware image file from the local system (Local is selected by default). Click Browse, select the .d9 firmware image file that you extracted (step 1), or the Dell Update Package (DUP) for Windows, and click Upload.
  6. Wait for the upload to complete. After the upload is completed, the Update Details section displays the uploaded file and the status.
  7. Select the firmware file and click Install. The message RAC0603: Updating Job Queue is displayed.
  8. Click Job Queue. The Job Queue page is displayed, where you can view the firmware update job status. After the update is completed, iDRAC restarts automatically.

For more information, see the iDRAC 3.15.15.15 User's Guide available at http://www.dell.com/idracmanuals.

Upgrade

N/A

Uninstallation

N/A