Inspiron 11 3000 Service Manual

Procedure

CAUTION Place the computer on a soft and clean surface to avoid scratching the display back-cover and antenna assembly.

Place the display assembly on a flat and clean surface.
Align the screw holes on the display hinges with the screw holes on the palm-rest and keyboard assembly.
Replace the two screws (M2.5x6) that secure the display assembly to the palm-rest and keyboard assembly.
Slide the display cable into the connector on the system board and close the latch to secure the cable.
Slide the display-cable bracket into the slot on the palm-rest and keyboard assembly.
Align the screw hole on the display-cable bracket with the screw hole on the system board.
Replace the screw (M2x3) that secures the display-cable bracket to the system board.