Inspiron 15 3000 Service Manual

Procedure

1. Place the display assembly on a clean, flat surface.
2. Place the palm-rest assembly on the display assembly.
3. Close the display hinges and align the screw holes on the display hinges with the screw holes on the palm-rest assembly.
4. Replace the three screws (2.5x8) that secure the display hinges to the palm-rest assembly.
5. Route the antenna cables through the routing guides on the palm-rest assembly.
6. Connect the display cable and close the latch to secure the cable.
7. Route the display cable through the routing guides on the palm-rest assembly.
8. Adhere the tape that secures the display cable to the palm-rest assembly.
9. Close the display and turn the computer over.