Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 15 5505 Service Manual

PDF

Removing the display assembly

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.

About this task

The figure indicates the location of the display assembly and provides a visual representation of the removal procedure.

Image: Disconnecting the display cable and removing the hinge screws

Image: Lifting the palm-rest and keyboard assembly

Steps

  1. Peel off the tape that secures the display cable to the system board.
  2. Open the latch, and disconnect the display cable from the system board.
  3. Remove the screw (M2.5x3.5) and the two screws (M2.5x5) that secure the right display hinge to the system board.
  4. Remove the three screws (M2.5x5) that secure the left display hinge to the system board.
  5. Lift the palm-rest and keyboard assembly up to raise the display hinges.
  6. Slide the palm-rest and keyboard assembly carefully off the display assembly.
    NOTE: To avoid damaging the display, do not slide the palm-rest and keyboard assembly over the display assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\