Inspiron 15 Gaming Service Manual

Procedure

Replace the touch pad.
Replace the power-button board.
Align and place the palm rest and keyboard assembly on the computer base.
Slide the keyboard cable and the power-button board cable into the connectors on the system board and close the latches to secure the cables.
Press down the edges of the palm rest and keyboard assembly and snap it into place.
Close the display and turn the computer over.
Replace the 15 screws (M2.5x5) that secure the palm rest and keyboard assembly to the computer base.
Replace the two screw (M2.5x8) that secure the palm rest and keyboard assembly to the computer base.
Slide the touch-pad cable and the keyboard-backlit cable into the connectors on the system board and close the latches to secure the cables.