Inspiron 3670 Service Manual

Procedure

1. Ensure that the release lever on the processor socket is fully extended in the open position. Then align the notches on the processor with the tabs on the processor socket and place the processor in the processor socket.
   CAUTIONThe pin-1 corner of the processor is marked with a triangle that must align with the triangle marking on the pin-1 corner on the processor socket to ensure that the processor is properly seated. When the processor is properly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the others, the processor is not seated properly and closing the securing bracket may permanently damage the processor.

   CAUTIONEnsure that the securing-bracket notch is positioned underneath the alignment post.
2. When the processor is fully seated in the socket, close the securing bracket.
3. Pivot the release-lever down and place it under the tab on the securing bracket.