Dell Latitude 5420 Rugged Setup and Specifications

PDF

Power management

Table 1. Power ManagementThe table describes the power management options.
Option	Description
Lid Switch	Allows you to enable or disable the lid switch from automatically turning on / off the screen when the lid is closed.
AC Behavior	Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected. Wake on AC This option is not set by default.
Auto On Time	Allows you to set the time at which the computer must turn on automatically. The options are: Disabled—Default Every Day Weekdays Select Days This option is not set by default.
USB Wake Support	Allows you to enable USB devices to wake the system from standby. Enable USB Wake Support Wake on Dell USB-C Dock This option is not set by default.
Wireless Radio Control	This option if enabled, will sense the connection of the system to a wired network and subsequently disable the selected wireless radios (WLAN and/or WWAN). Upon disconnection from the wired network the selected wireless radio will ne enabled. Control WLAN radio Control WWAN radio This option is not set by default.
Wake on LAN	This option allows the computer to power up from the off state when triggered by a special LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system. This feature only works when the computer is connected to AC power supply. Disabled—Default - Does not allow the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN. LAN Only - Allows the system to be powered on by special LAN signals. WLAN Only - Allows the system to be powered on by special WLAN signals. LAN or WLAN - Allows the system to be powered on by special LAN or WLAN signals.
Peak Shift	Allows you enable of disable the Peak shift feature. This feature when enabled minimizes the AC power usage at times of peak demand. Battery doesnot charge between the Peak Shift start and end time Peak Shift Start and End Time can be configured for all weekdays This option set the battery threshold value (15 % to 100 %)
Advanced Battery Charge Configuration	This option enables you to maximize the battery health. By enabling this option, your system uses the standard charging algorithm and other techniques, during the non-work hours to improve the battery health. Advanced Battery Charge Mode can be configured for all weekdays
Battery #1 Charge Configuration	Allows you to select the charging mode for the battery. The options are: Adaptive—Default Standard - Fully charges your battery at a standard rate. ExpressCharge- The battery charges over a shorter period of time using Dell’s fast charging technology. Primarily AC use Custom If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop. NOTE: All charging mode may not be available for all the batteries.
Battery #2 Charge Configuration
Type-C connector Power	This option allows you to set maximum power that can be drawn from the Type-C connector. The options are: 7.5 Watts—Default 15 Watts
Power Usage Mode	This field lets you choose the system power usage mode. The options are: Power Saver Balanced — Default. High Performance