Latitude 7490 Owner's Manual

Installing Solid State Drive

1. Insert the Solid State Drive into the connector.
2. Install the Solid State Drive bracket over the Solid State Drive.
   NOTE When installing the Solid State Drive bracket, ensure that the tab on the bracket is held securely with the tab on the palm rest.
3. Tighten the two (M2.0 x 3.0) screws to secure the Solid State Drive to the Solid State Drive bracket and in turn to the Palmrest.
4. Connect the battery cable to the connector on the system board.
5. Install the base cover.
6. Follow the procedure in After working inside your computer.