- Notes, cautions, and warnings
- Before working inside your tablet
- After working inside your tablet
- Removing the battery
- Replacing the battery
- Removing the solid-state drive
- Replacing the solid-state drive
- Removing the wireless card
- Replacing the wireless card
- Removing the front camera
- Replacing the front camera
- Removing the back camera
- Replacing the back camera
- Removing the coin-cell battery
- Replacing the coin-cell battery
- Removing the headset port
- Replacing the headset port
- Removing the microphone
- Replacing the microphone
- Removing the power-button board
- Replacing the power-button board
- Removing the volume-buttons board
- Replacing the volume-buttons board
- Removing the system board
- Replacing the system board
- Removing the back cover
- Replacing the back cover
- Removing the display assembly
- Replacing the display assembly
- Technology and
components
- Power adapter
- Processors
- Downloading the chipset driver
- Identifying the chipset in Device Manager on Windows 10
- Identifying chipset in Device Manager on Windows 8
- Graphic options
- Downloading Driver
- Identifying the display adapter
- Changing the screen resolution
- Rotating the display
- Display options
- Adjusting brightness in Windows 10
- Adjusting brightness in Windows 8
- Cleaning the display
- Using touch screen in Windows 10
- Using touch screen in Windows 8
- Connecting to external display devices
- Realtek ALC3266–CG Waves MaxxAudio Pro controller
- WLAN cards
- Hard drive options
- Camera features
- Memory features
- Intel chipset drivers
- Intel HD Graphics drivers
- Realtek HD audio drivers
- Realtek RTS5242-GR Card Reader drivers
- Realtek LAN network drivers
- Intel Wireless 3165 WiFi and Bluetooth drivers
- Entering BIOS setup program
- Specifications
- Getting help and contacting Dell
Latitude 12–7275 Owner’s Manual
Procedure
- Align the screw holes on the system board with the screw holes on the back-cover assembly.
- Replace the screws that secure the system board to the back-cover assembly.
- Align the screw holes on the I/O bracket with the screw holes on the system board.
- Replace the screws that secure the I/O bracket to the system board.
- Slide in the headset-port cable, power-button board cable and display assembly cable into the respective connectors on the system board and press down the latches to secure the cables.
- Connect the speaker cables, camera cables, microphone cable, and coin-cell battery cable to the respective connectors on the system board.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\