For a list of switching equipment with appropriate rails, see the Quick reference section.
Abbreviation | Rail description | Rack height | Part number | SKU | Additional information |
---|---|---|---|---|---|
1U-S-RR | Standard ReadyRail (1) | 1U | N243X | 770-BBGY, 770-BDRL | Standard Dell ReadyRail mounting slides. A5. For a 434 mm (17.08 in) wide switch. |
1U-R-RR | Reversible ReadyRail | 1U | J9CKF | 770-BCFQ | Standard Dell ReadyRail where the rails can be reversed. For a 434 mm (17.08 in) wide switch.
|
1U-M-RR | Modified ReadyRail | 1U | HRTVK | 770-BCIN | Similar to the Standard ReadyRail but with the stop removed. Supports a 450 mm to 793 mm (17.72 in to 31.2 in)-rack span. |
2U-S-RR | Standard ReadyRail (1) | 2U | 6CJRH | 770-BBJF | Standard B9 ReadyRail mounting slides. Use with the Z9264F-ON, S6100-ON, or S5296-ON products. |
2U-E-RR | Extended ReadyRail | 2U | NKFHM | 575-BBMQ | Must be used with the standard B9 ReadyRail but built specifically for reverse-install scenarios. Permits an extra 9” face offset to align with longer servers. |
1U-Z93xx-RR | Z9332F-ON ReadyRail | 1U | 08P6H | 770-BDKS | Use with a 438.5 mm (17.26 in) wide switch. Uses a different screw placement from the standard ReadyRails. The rack span is 17.18 to 32.30 inches (436.4 mm to 820.4 mm). |
1U-S52-S41-12-4P | S5212F-ON & S4112-ON Series rails. Use with the S5212F-ON dual-tray. | 1U | TTVK9 | N/A | Use these rails with the S5212F-ON or S4112-ON Series dual-trays in four-post installations. |
1U-EMC-3.14-RR | EMC Gen3.14 bezel rails | 1U | 19T1K | N/A | EMC rails to use in rear-mount (I/O-side of the switch faces the back of the rack) four-post racks. Use with a 434 mm (17.08 in) wide switch.
|
1U-EMC-3-RR | EMC Gen 3 bezel rails | 1U | V45CP | N/A | EMC rails to use in rear-mount (I/O-side of the switch faces the back of the rack) four-post racks. Use with a 434 mm (17.08 in) wide switch.
|
2U-EMC-Z92xx-RR | Z9264F-ON bezel rails for EMC 2RU Gen3.14/Gen3 bezel | 2U | 150-042-005 | N/A | Platform-specific rails used with Gen 3.14 or Gen 3 bezel rails. Use these EMC rails with rear-mount (I/O-side of the switch faces the back of the rack), four-post racks.
|
1U-DN-RR | Z9432F-ON & S5448F-ON Special ReadyRails | 1U | TDYXP | 770-BDYT | For a 438.5 mm (17.26 in) wide switch. Four-post rack-mount installations.
|
2U-DN-RR | Z9664F-ON ReadyRails | 2U | N7WVX | N/A | Platform-specific ReadyRail. Use with a 438.5 mm (17.26 in) wide, 2 RU switch.
|
2U-DN-4P | Z9664F-ON Special Rail kit | 2U | JGF0H | N/A | Platform-specific 4 Post bracket Rail. Use with a 438.5 mm (17.26 in) wide, 2 RU switch.
|
2U-EMC-RR | Z9664F-ON EMC Rail kit | 2U | JC5HG | N/A | Platform-specific rails used with Gen 3.14 or Gen 3 RU bezel. Use these EMC rails with rear-mount (I/O-side of the switch faces the back of the 4 post rack).
|
1U-DN-RR-Reversible | Z9432F-ON & S5448F-ON Special ReadyRails | 1U | X54PT | N/A | For a 438.5 mm (17.26 in) wide switch. Four-post rack-mount installations.
|
1U-EMC-Gen3/3.14-RR | EMC Gen3/3.14 bezel rails for S5448F-ON, Z9332F-ON, and Z9432F-ON | 1U | 6DWDR | N/A | EMC rails to use in rear-mount (I/O-side of the switch faces the back of the rack) four-post racks. Use with a 438.5 mm (17.26 in) wide switch.
|
(1) Extended NEBS "Deep rack" rails for 2RU switches available upon request.
Use with a 434 mm (17.08 in) wide switch.
Bidirectional Ingress/Egress. In-rail power cord route access and stabilizer. Use with a 434 mm (17.08 in) wide switch.
Similar to the Standard ReadyRail but with the stop removed. Supports a 450 mm to 793 mm (17.72 in to 31.2 in)-rack span.
Use with the Z9264F-ON, S6100-ON, or S5296-ON products.
For reverse-install scenarios. Permits an extra 9” face offset to align with longer servers.
For four-post racks.
For four-post racks. Use with the S5112F-ON or S4112-ON Series dual-trays.