OpenManage Integration for Microsoft System Center Version 7.2 for System Center Configuration Manager and System Center Virtual Machine Manager User’s Guide
To manually discover PowerEdge MX7000 Modular System by using an
IP address or an IP range, provide a Modular System’s IP address and
device type credentials of the Modular System. When you are discovering
Modular Systems by using an IP range, specify an IP (IPv4) range within
a subnet by including the start and end range and the device type
credentials of the Modular Systems.
Prerequisites
Ensure that
the default credential profile of a Modular System you want to discover
is available.
About this task
To discover Modular Systems, perform the following steps:
Steps
In OMIMSSC, click Configuration and Deployment, click Modular Systems View, and then click Discover.
In the Discover page, select the
required option:
Discover Using an IP Address—to discover a Modular System
using an IP address.
Discover Using an IP Range—to discover all Modular Systems
within an IP range.
Select the device type credential profile, or click Create
New to create a device type credential profile.
The selected profile is applied to all the servers.
In IP address, provide the IP address of the Modular System
that you want to discover.
In Discover Using an IP Address or IP Address Range, do one of the following:
In IP Address Start Range, and IP Address End
Range, provide the IP address range that you want to include,
which is the starting and ending range.
Select Enable Exclude Range if you want to exclude an IP address
range and in IP Address Start Range and IP Address End Range, provide the range that you want
to exclude.
In Modular Systems Discovery Methods, select
one of the following:
Shallow discovery—discovers Modular Systems and also
number of servers in the Modular System.
Deep discovery—discovers Modular Systems and devices
present in the Modular System such as Input Output Modules (IOM) and
storage devices.
NOTE: To deep discover MX7000 and its components, ensure that PowerEdge
MX7000 and all its components are enabled with IPv4 address.
Provide a unique job name, and click Finish.
To track this job, the
Go to the Job List
option is selected by default.
To view the progress of the job in the Running tab, expand the discovery job in Jobs and Logs Center.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\