You are logged in to Microsoft Windows Admin Center as a Gateway Administrator.
You must have installed the Dell EMC OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC) extension. For more information about the installation procedure, see the
Dell EMC OpenManage Integration with Microsoft Windows Admin Center Installation Guide at
Dell.com/OpenManageManuals.
The Redfish service is enabled in the iDRAC before connecting to a server from OMIMSWAC.
To manage PowerEdge servers:
In the upper left corner of Windows Admin Center, select
Server Manager from the drop-down menu.
From the list, select a server connection, and then click
Connect.
NOTE: : If you have not entered the server credentials while adding the connection, you must enter the credentials when you are connecting to the server by selecting "Manage as".
In the left pane of the Microsoft Windows Admin Center, under
EXTENSIONS, click
OpenManage Integration.
NOTE: : A status icon represents the overall health status of the server.
NOTE: : The health and hardware inventory details are fetched from the devices each time the OpenManage Integration with Windows Admin Center extension is loaded. This might cause a delay in displaying the information.
NOTE: : For modular servers (YX2X, YX3X, and YX4X models of PowerEdge servers), the following information that is related to fans and power supplies are not displayed:
Health status
Attribute values in the hardware inventory table
NOTE: : For YX2X and YX3X models of PowerEdge servers with firmware version earlier than 2.60.60.60, information about the following components are not displayed:
Health status—Memory, storage controllers, storage enclosures, and physical disks.