Dell EMC OpenManage Integration Version 2.2.1 with Microsoft Windows Admin Center Release Notes
Compatibility matrix
The following table lists the supported Microsoft Windows Admin Center version, browser, operating system, supported software, and supported hardware required for OMIMSWAC.
| Supported software and hardware | Version |
|---|---|
| Microsoft Windows Admin Center | Windows Admin Center 2110 GA.
Microsoft recommends to use the latest version of the Windows Admin Center. For more information, see the Microsoft Windows Admin Center documentation at https://www.microsoft.com/en-us/cloud-platform/windows-admin-center. |
| Microsoft Cluster Creation Extension | 1.577.0 nupkg release. |
| Microsoft Failover Cluster Tool Extension | 2.20.0 nupkg release. |
| Operating system for managed nodes |
|
| Browsers | For more information about the supported browsers by Microsoft Windows Admin Center, see the Microsoft Windows Admin Center documentation at https://www.microsoft.com/en-us/cloud-platform/windows-admin-center. |
| Dell EMC System Update Utility (DSU) | 1.9.2
The Systems-Management_Application_5C2CW_WN64_1.9.2.0_A00.EXE DSU file can be downloaded from here. |
| Dell EMC Inventory Collector (IC) | 21_12_200_1196
The supported version of IC can be downloaded from here. |
| Dell EMC Repository Manager (DRM) | 3.3.2
The supported version of DRM can be downloaded from here. |
NOTE Dell EMC OpenManage Integration supports target nodes running Windows Server Core operating system.
Supported devices and OMIMSWAC features
For more information on the generic naming convention of PowerEdge servers, see
Identifying the generation of your Dell EMC PowerEdge server.
NOTE Update management features such as CAU and full stack updates are available for the latest platforms once the applicable update packages and the update catalog are released from Dell EMC, which is generally within two to three weeks from platform launch.
The table below lists the OMIMSWAC features supported in servers and clusters. For more information on specific server model support, see the "Compatible System" section in
dell.com/support site.
YX2X PowerEdge servers
| OMIMSWAC features | OMIWAC Premium License | PowerEdge servers as target nodes and Hyper-V based failover clusters | Dell EMC Integrated System for Microsoft Azure Stack HCI (AX nodes) | Dell EMC HCI Solutions for Microsoft Windows Server (AX nodes or Storage Space Direct ready nodes) | ||||
|---|---|---|---|---|---|---|---|---|
| YX2X PowerEdge servers | YX3X PowerEdge servers | YX4X PowerEdge servers | YX5X PowerEdge servers | |||||
| Health, Inventory, and iDRAC | No | Yes | Yes | Yes | Yes | Yes | Yes | |
| Cluster-Aware Updating (CAU) (Available only for clusters) | Yes | No | No | Yes | Yes | Yes | Yes | |
| Integrated deploy and update | Yes | No | No | No | No | Yes | No | |
| Full stack update (Available only for clusters) | Yes | No | No | No | No | Yes | No | |
| Manage CPU cores | Yes | No | No | Yes | Yes | Yes | Yes | |
| Prepare nodes for cluster expansion (Available only for clusters) | Yes | No | No | Yes | Yes | Yes | Yes | |
| Infrastructure lock | No
NOTE Enabling infrastructure lock requires an Enterprise License or Datacenter license at a minimum.
|
No | No | Yes | Yes | Yes | Yes | |
| Secured-core (Available only for clusters) | Yes | No | No | No | Yes | No | No | |
NOTE YX2X models of PowerEdge servers with iDRAC7 and iDRAC8 respectively (Recommended firmware version of 2.60.60.60 or later)
- PowerEdge servers with firmware versions lower than 2.60.60.60 may not display information about hardware inventory and health status of a few components. .
- In YX2X models of PowerEdge servers, following features are not available:
- Cluster-Aware Updating
- Health and Inventory information of Accelerators
YX3X PowerEdge servers
YX4X devices
NOTE
YX3X models of PowerEdge servers with iDRAC7 and iDRAC8 respectively (Recommended firmware version of 2.60.60.60 or later)
- PowerEdge servers with firmware versions lower than 2.60.60.60 may not display information about hardware inventory and health status of a few components. For more information about the components for which the information is not available, see Dell EMC OpenManage Integration with Microsoft Windows Admin Center User's Guide.
- In YX3X models of PowerEdge servers, following features are not available:
- Cluster-Aware Updating
- Health and Inventory information of Accelerators
- YX4X models of PowerEdge servers with iDRAC9 (Recommended firmware version of 3.30.30.30 or later).
- PowerEdge XE2420 Edge server (Recommended iDRAC firmware 4.00.129.00 or later).
YX5X devices
- YX5X models of PowerEdge servers with AMD platforms having iDRAC9 (Recommended firmware version of 3.40.40.40 or later).
- YX5X models of PowerEdge servers with Intel platforms having iDRAC9 (Recommended firmware version 4.40.x.x or later)
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\