Introduction
to the Dell OpenManage Plug-in Version 2.0 for Nagios Core
This guide provides information about the software
requirements, system requirements, and the steps to install, upgrade,
and uninstall the Dell OpenManage Plug-in Version 2.0 for Nagios Core.
This plug-in provides capabilities to monitor Dell
devices in environments managed by Nagios Core. This plug-in gives
you complete hardware-level visibility of Dell devices, including
overall and component-level health monitoring. The plug-in provides
basic inventory information and event monitoring of Dell devices.
The plug-in also supports one-to-one web console launch of the supported
Dell devices for further troubleshooting, configuration, and management
activities.
The Dell OpenManage Plug-in Version 2.0 for Nagios
Core supports the following Dell devices:
- Dell 12th and later generations of Dell PowerEdge
servers through the agent-free method by using Integrated Dell Remote
Access Controller (iDRAC) with Lifecycle Controller (LC)
- Dell Datacenter Scalable Solutions (DSS)
- Dell PowerEdge FX2/FX2s chassis, Dell PowerEdge VRTX
chassis, and Dell PowerEdge M1000e chassis
- Dell EqualLogic PS-Series Storage Arrays, Dell PowerVault
MD 34/38 Series Storage Arrays, and Dell Compellent Storage Arrays
For more details on device support, see Support matrix
in the “Dell OpenManage Plug-in Version 2.0 for Nagios Core User’s
Guide.”
Table 1. Key featuresThe key features of this plug-in are as follows
Feature |
Functionality |
Device Discovery |
Discovers Dell devices. Once the
discovery is complete, host and service definitions are created for
each device. To discover Dell servers through iDRAC
with Lifecycle Controller, you can opt for either SNMP or WS-MAN protocol.
However, Dell storage is discovered using SNMP protocol and Dell chassis
is discovered using WS-MAN protocol. |
Device Information |
Displays information about the
discovered device such as Service Tag, Firmware Version, Device Name,
Device Model, and so on after a device discovery is successful. You
can view this information in the Hosts or the Services view in the Nagios Core console. For more
information about device services and their description, see Device
Information in the Dell OpenManage Plug-in Version 2.0 for
Nagios Core User’s Guide. |
Monitor overall health of Dell devices |
Monitors the overall health of
Dell devices. |
Component level health of Dell devices |
Monitors health of the Dell device
components such as Physical Disks, Power Supply, Temperature Probe,
Voltage Probe, and so on, and displays the information about the respective
components. For more information about Component level health of
Dell devices and their description, see Monitor Component Health
of Dell Devices in the Dell OpenManage Plug-in Version 2.0
for Nagios Core User’s Guide. |
Monitor SNMP alerts |
Monitors SNMP alerts for Dell devices.
This feature displays only the last received SNMP alert. To
view all received SNMP alerts navigate to in the Nagios Core console. You can
also view the Alert Knowledge Base (KB) information for the supported
Dell devices corresponding to an SNMP alert for faster troubleshooting
of the respective alert. For more information, see Knowledge
Base (KB) messages for the generated alerts in the Dell OpenManage
Plug-in Version 2.0 for Nagios Core User’s Guide. |
Launching Dell device specific consoles |
Launches the respective Dell one-to-one
consoles to further troubleshoot and manage the supported Dell devices. |
Warranty information |
Monitors and displays the warranty information
for the supported Dell devices. For more information, see Warranty
information for Dell devices in the Dell OpenManage Plug-in
Version 2.0 for Nagios Core User’s Guide. |
This plug-in supports Nagios Core versions 3.5.0 and
later.
Before installing Dell OpenManage Plug-in Version
2.0 for Nagios Core, download the latest documents from Dell.com/omconnectionsEnterpriseSystemsManagement or Dell.com/openmanagemanuals for the latest information
about this product.