Dell EMC OpenManage Plug-in Version 3.1 For Nagios XI Installation Guide

PDF

System requirements for managed systems

A managed system is a supported Dell EMC device that you are monitoring. The requirements for the managed systems are as follows:

Table 1. Supported firmware versions for Dell EMC PowerEdge ServersSupported firmware versions for Dell EMC PowerEdge Servers
Dell EMC PowerEdge Servers	Firmware Version
iDRAC9 based PowerEdge servers	4.0.0.0 and later versions
12th and 13th Generations PowerEdge servers	2.63.60.61 and later versions

NOTE: HCI , DSS devices also supports 13th Generation and iDRAC9

Table 2. Supported firmware versions for PowerEdge ChassisSupported firmware versions for M1000e, MX7000, VRTX, FX2/FX2s
Dell EMC PowerEdge Chassis	CMC version
PowerEdge M1000e Chassis	6.1 and later versions
PowerEdge MX7000 modular chassis	1.1 and later versions
PowerEdge VRTX chassis	3.2 and later versions
PowerEdge FX2/FX2s chassis	2.2 and later versions

Table 3. Supported firmware versions for StorageSupported firmware versions for Storage
Dell EMC Storage Arrays	Supported Firmware version
Dell Compellent SC-Series Storage Arrays	7.2.1 and later versions
EqualLogic PS-Series Storage Arrays	9.1.4 and later versions
PowerVault MD 34/38 Series Storage Arrays	08.25.11.60 and later versions
PowerVault ME4 Storage Arrays	GT280R004-01 and later versions

Table 4. Supported firmware versions for Network switchesSupported firmware versions for network switches
Dell EMC Operating System based Network switches	Supported firmware versions
Operating System 6	6.6.0.13 and later versions
Operating System 9	19.4.1.8 and later versions
Operating System 10	10.5.1.0 and later versions

If you are using SNMP protocol, ensure that SNMP is configured in the respective devices.
If you want to receive SNMP traps in the Nagios XI console, ensure that you configure the SNMP trap destination in the respective devices.

For more information, see Appendix in the Dell EMC OpenManage Plug-in Version 3.1 for Nagios XI Users Guide at dell.com/omconnectionsEnterpriseSystemsManagement.
If you are using WSMan protocol, it is recommended that you use a WSMan service account other than the default service account. For more information, see Configuring User Accounts and Privileges in the respective device Users Guide at Dell.com/esmmanuals.

For the list of supported platforms, see Support Matrix in the Dell EMC OpenManage Plug-in Version 3.1 for Nagios XI Users Guide.