Dell EMC OpenManage SNMP Reference Guide Version 9.2

PDF

NVME adapter table

This table describes available NVME adapter cards on the managed system. The number of entries is related to number of NVME Adapter cards discovered in the system.

The following object sets up the NVME adapter Table.

Table 1. NVME Adapter Table . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterTable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18
Description	A table of listed NVME Adapter cards NOTE: The properties in this table may not be applicable to all entries.
Syntax	SEQUENCE OF NvmeAdapterEntry
Access	Not accessible

Table 2. NVME Adapter Entry . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterEntry`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1
Description	An entry in the NvmeAdapter table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Syntax	NvmeAdapterEntry
Access	Not accessible

Table 3. NVME Adapter Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.1
Description	Instance number of this NVME Adapter entry.
Syntax	INTEGER
Access	Read-only

Table 4. NVME Adapter State . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.2
Description	The current state of the NVMe Adapter.
Syntax	INTEGER
Access	Read-only

Table 5. NVME Adapter Controller Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterControllerNum`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.3
Description	The PCIeSSD subsystem Id to which the NVMe Adapter belongs to.
Syntax	INTEGER
Access	Read-only

Table 6. NVME Adapter PCI Slot . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterPCISlot`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.4
Description	The PCI slot of the system where the adapter card is connected.
Syntax	INTEGER
Access	Read-only

Table 7. NVME Adapter Device Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterDeviceName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.5
Description	The device name of the NVMe Adapter as it is represented in OMSA and also the operating system.
Syntax	DisplayString
Access	Read-only

Table 8. NVME Adapter Vendor . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.6
Description	NVMe Adapter manufacturer.
Syntax	DisplayString
Access	Read-only

Table 9. NVME Adapter Product ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterProductID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.7
Description	The product id or part number of the NVMe Adapter.
Syntax	DisplayString
Access	Read-only

Table 10. NVME Adapter Serial Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterSerialNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.8
Description	Product serial number of the NVMe Adapter.
Syntax	DisplayString
Access	Read-only

Table 11. NVME Adapter Revision . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterRevision`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.9
Description	The NVMe Adapter revision.
Syntax	DisplayString
Access	Read-only

Table 12. NVME Adapter Driver Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterDriverVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.10
Description	NVMe Adapter driver version.
Syntax	DisplayString
Access	Read-only

Table 13. NVME Adapter PCI Bus Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterPCIBusNo`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.11
Description	The PCI Bus number of the NVMe adapter.
Syntax	INTEGER
Access	Read-only

Table 14. NVME Adapter PCI Device Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterPCIDeviceNum`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.12
Description	The PCI device number of the NVMe Adapter.
Syntax	INTEGER
Access	Read-only

Table 15. NVME Adapter PCI Func Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterPCIFuncNum`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.13
Description	The PCI device number of the NVMe Adapter.
Syntax	INTEGER
Access	Read-only

Table 16. NVME Adapter Nexus ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterNexusID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.14
Description	Nexus ID of the NVMe Adapter.
Syntax	DisplayString
Access	Read-only

Table 17. NVME Adapter Bus Protocol Type . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterBusProtocolType`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.15
Description	The Bus protocol for NVMe device: value: 9 (PCIeSSD)
Syntax	INTEGER
Access	Read-only

Table 18. NVME Adapter Media Type . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterMediaType`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.16
Description	NVMe Adapter media type. Possible Values: 1: unknown 2: ssd
Syntax	INTEGER
Access	Read-only

Table 19. NVME Adapter Length In Mega Bytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterLengthInMegaBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.17
Description	Size in megabytes of the NVMe Adapter.
Syntax	INTEGER
Access	Read-only

Table 20. NVME Adapter Length Offset Bytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterLengthOffsetBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.18
Description	Number of bytes after total number of megabytes have been subtracted from the total size of the NVMe Adapter.
Syntax	INTEGER
Access	Read-only

Table 21. NVME Adapter Device ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterDeviceID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.19
Description	The device Id of the NVMe Adapter.
Syntax	INTEGER
Access	Read-only

Table 22. NVME Adapter Model Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterModelNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.20
Description	Model number of the NVMe Adapter as per the manufacturer.
Syntax	DisplayString
Access	Read-only

Table 23. NVME Adapter Negotiated Speed . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterNegotiatedSpeed`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.21
Description	The negotiated speed of the NVMe adapter in GT/s.
Syntax	DisplayString
Access	Read-only

Table 24. NVME Adapter Capable Speed . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterCapableSpeed`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.22
Description	The maximum rated speed of the NVMe adapter in GT/s.
Syntax	INTEGER
Access	Read-only

Table 25. NVME Adapter Remaining Rated Write Endurance . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterRemainingRatedWrEnd`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.23
Description	The remaining percentage of writes on the NVME device.
Syntax	INTEGER
Access	Read-only

Table 26. NVME Adapter Form Factor . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterFormFactor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.24
Description	The form factor of the NVMe Adapter. Possible Values 2 : Card
Syntax	INTEGER
Access	Read-only

Table 27. NVME Adapter Supported Specification . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterSupportedSpec`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.25
Description	The NVMe specification supported by the device.
Syntax	DisplayString
Access	Read-only

Table 28. NVME Adapter Maximum Link Width . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterMaxLinkWidth`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.26
Description	The maximum bus width of NVME Adapter.
Syntax	INTEGER
Access	Read-only

Table 29. NVME Adapter Negotiated Link Width . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterNegotiatedLinkWidth`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.27
Description	The negotiated bus width of NVMe Adapter.
Syntax	INTEGER
Access	Read-only

Table 30. NVME Adapter Sub Vendor . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterSubVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.28
Description	Sub vendor of the NVMe Adapter device.
Syntax	DisplayString
Access	Read-only

Table 31. NVME Adapter Available Spare . The following table describes the name, object ID, description, syntax, and access level.
Name	`nvmeAdapterAvailableSpare`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.18.1.29
Description	The remaining available spare space on the NVME device.
Syntax	INTEGER
Access	Read-only