Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell EMC OpenManage CIM Reference Guide Version 9.3.1

PDF

CIM_PCIController

CIM_PCIController

The CIM_PCIController class described in Table below contains a set of devices that follow the Peripheral Component Interconnect (PCI) protocol defined by the Personal Computer Memory Card International Association (PCMCIA). The PCI protocol defines how data is transferred between devices. The CIM_PCIController class contains PCI adapters and bridges.

The following table describes the properties and data type of the CIM PCI Controller class.

Class Name:CIM_PCIController

Parent Class:CIM_Controller

Table 1. CIM_PCIController PropertiesThe following table describes the properties and data type of the CIM PCI Controller class.
Property Description Data Type
CommandRegisterThe current contents of the register that provide basic control over the device’s ability to respond to, and/or perform PCI accesses. The data in the capabilities array is gathered from the PCI status register and the PCI capabilities list as defined in the PCI specification.

Values for the CommandRegister property are:

0 — Unknown

1 — Other

2 — Supports 66 MHz

3 — Supports user-definable features

4 — Supports fast back-to-back transactions

5 — PCI-X capable

6 — PCI power management supported

7 — Message signaled interrupts supported

8 — Parity error recovery capable

9 — AGP supported

10 — Vital product data supported

11 — Provides slot identification

12 — Hot swap supported

uint16

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\