Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

OptiPlex 3000 Tower Service Manual

Installing internal antenna

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the internal antenna and provide a visual representation of the installation procedure.

Installing internal antenna

Steps

  1. Insert the main-antenna into the ANT-W slot and auxiliary-antenna into the ANT-B slot.
    NOTE: Applies if you are upgrading the system that did not have these optional modules.
  2. Route the antennas using the routing guides and insert the antenna cables through the hole that is provided in the system chassis.
  3. Replace the two screws to secure the main and auxiliary antennas to the system chassis.
  4. Connect the antenna cables to the WLAN card.
    The following table provides the antenna-cable color scheme:
    Table 1. Antenna-cable color schemeThe table provides the antenna-cable color scheme for the WLAN card:
    Connectors on the wireless card Antenna-cable color
    Main (white triangle) White
    Auxiliary (black triangle) Black

Next steps

  1. Install the side cover.
  2. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\