Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OptiPlex 3070 Micro Service Manual

Removing the M.2 PCIe SSD

NOTE The instructions are applicable to M.2 SATA SSD also.
  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. Side cover
    2. 2.5 inch hard drive assembly
  3. To remove the M.2 PCIe SSD:
    1. Remove the single (M2X3.5) screw that secures the M.2 PCIe SSD to the system board [1].
    2. Lift and pull out the PCIe SSD from its connector on the system board [2].
      Displays the removal of SSDDisplays the removal of SSD
      Displays the removal of SSD

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\