OptiPlex 5080 Tower Setup and specifications guide

Ports and connectors

Table 1. Ports and connectors
The following table lists ports and connectors available on OptiPlex 5080 Tower.
Description	Values
External:
Network	One RJ-45 port 10/100/1000 Mbps (rear)
USB	One USB 2.0 ports (front) One USB 2.0 port with PowerShare (front) One USB 3.2 Gen 1 Type-A port (front) One USB 3.2 Gen 2 Type-C port (front) Four USB 3.2 Gen 1 Type-A ports (rear) Two USB 2.0 ports with Smart Power On (rear)
Audio	One Universal Audio Jack (front) One Line-out re-tasking Line-in audio port (rear)
Video	Two DisplayPort 1.4 ports (rear) One Optional 3rd Video Port (VGA/DP/HDMI 2.0b/USB Type-C)
Memory card reader	One SD 4.0 (optional)
Power port	4.50 mm x 2.90 mm DC-in
Parallel/Serial port	One Serial port (optional)
PS/2 port	Two (optional)
Security	One Kensington security-cable slot
Antenna	Two SMA connectors (optional)
Internal:
Expansion	Two full-height PCIe x1 slot One full-height PCIe x16 slot One full-height PCIe x 4 slot
SATA	Three SATA slots for 3.5-inch Hard-disk drive/2.5-inch Hard-disk drive, 1 SATA slot for slim Optical Disk Drive
M.2	One M.2 2230 slot for WiFi and Bluetooth card One M.2 slot for 2280 PCIe solid-state drive/Optane or 2230 PCIe solid-state drive NOTE To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626.