Dell Chassis Management Controller Version 6.0 for PowerEdge M1000e RACADM CLI Guide

sslcertdownload


Description	Downloads an SSL certificate from CMC to the client’s file system. To run this subcommand, you must have the Server Control privilege. NOTE This subcommand is only supported on the remote interface(s).
Synopsis	racadm sslcertdownload -f <filename> -t <type>
Input	-f — Specifies the target filename on local file system to download the certificate. -t <type> — Specifies the type of certificate to download, either the CA certificate for Directory Service or the server certificate. 1=server certificate 2=Active Directory
Output	Returns 0 when successful and non-zero number when unsuccessful.
Example	Download server certificate: racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 1 -f cert.txt Download Active Directory certificate: racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 2 -f ad_cert.txt

NOTE This command is not supported in the firmware RACADM interface as it is not a file system.