Richtlinien zum Einsetzen von Erweiterungskarten
Je nach Konfiguration des Systems werden die nachfolgenden PCI-Express-Karten (PCIe) der 3. Generation unterstützt:
Tabelle 1. Erweiterungskarten-Riser-KonfigurationenDie Tabelle enthält Informationen zur Konfiguration der Erweiterungskarten-Riser im PowerEdge R440-System.
Erweiterungskarten-Riser |
PCIe-Steckplätze auf dem Riser |
Höhe |
Baulänge |
Link |
LOM-Riser |
Steckplatz 1 |
Zusatzkartentyp |
Zusatzkartentyp |
x8 |
Rechter Riser |
Steckplatz 2 |
Low-Profile |
Halbe Baulänge |
x16 |
Rechter Riser |
Steckplatz 2 |
Volle Bauhöhe |
Halbe Baulänge |
x16 |
Passive PCIe-Brücke |
In Steckplatz integriert |
Low-Profile |
Halbe Baulänge |
x8 |
Interner Riser |
In Steckplatz integriert |
Low-Profile |
Halbe Baulänge |
x8 |
Linker Riser |
Steckplatz 3 |
Low-Profile |
Halbe Baulänge |
x16 |
ANMERKUNG: Die Erweiterungskartensteckplätze sind nicht Hot-Swap-fähig (sie können nicht im laufenden Betrieb ausgetauscht werden).
Die folgende Tabelle enthält Vorschläge für die Installation von Erweiterungskarten hinsichtlich bestmöglicher Kühlung und mechanischer Unterbringung. Die Erweiterungskarten mit der höchsten Priorität müssen zuerst installiert werden und dabei die angegebene Steckplatzpriorität erhalten. Alle anderen Erweiterungskarten müssen nach Kartenpriorität und in der Reihenfolge der Steckplatzpriorität installiert werden.
Tabelle 2. Riser-Konfigurationen: Kein RiserDiese Tabelle enthält Informationen zur Steckplatzpriorität für die Konfiguration „Kein Riser“ des PowerEdge R440-Systems.
Kartentyp |
Steckplatzpriorität |
Formfaktor |
PERC9.14G (Foxconn) |
Integrierter Steckplatz |
Low-Profile |
RAID – PERC9.14G/PERC10 (intern) / PERC11 (Dell) |
Integrierter Steckplatz |
Low-Profile |
Nicht-RAID – PERC 11 (intern) (Dell) |
Integrierter Steckplatz |
Low-Profile |
1-Gbit-NIC Foxconn |
1 |
OCP |
Tabelle 3. Riser-Konfigurationen: FH (Riser mit voller Bauhöhe*1)Diese Tabelle enthält Informationen zur Steckplatzpriorität für die Riser-Konfiguration FH (Riser mit voller Bauhöhe*1) des PowerEdge R440-Systems.
Kartentyp |
Steckplatzpriorität |
Formfaktor |
PERC9.14G (Foxconn) |
2 |
Volle Bauhöhe |
PERC9.14G (Foxconn) |
Integrierter Steckplatz |
Low-Profile |
RAID – PERC9.14G/PERC10 (intern) / PERC11 (Dell) |
Integrierter Steckplatz |
Low-Profile |
Nicht-RAID – PERC 11 (intern) (Dell) |
Integrierter Steckplatz |
Low-Profile |
Nicht-RAID – PERC 11 (extern) (Dell) |
2 |
Volle Bauhöhe |
RAID PERC10 (extern) (Dell) |
2 |
Volle Bauhöhe |
NVMe-PCIe-SSD (Samsung, Intel) |
2 |
Volle Bauhöhe |
1-Gbit/s-NICs (Broadcom) |
2 |
Volle Bauhöhe |
10-Gbit/s-NICs (Broadcom) |
2 |
Volle Bauhöhe |
25-Gbit/s-NICs (Broadcom) |
2 |
Volle Bauhöhe |
1-Gbit/s-NICs (Intel) |
2 |
Volle Bauhöhe |
10-Gbit/s-NICs (Intel) |
2 |
Volle Bauhöhe |
25-Gbit/s-NICs (Intel) |
2 |
Volle Bauhöhe |
40-Gbit/s-NICs (Intel) |
2 |
Volle Bauhöhe |
FC8 HBA (Emulex) |
2 |
Volle Bauhöhe |
FC16 HBA (Emulex) |
2 |
Volle Bauhöhe |
InfiniBand-HCA-FDR (Mellanox) |
2 |
Volle Bauhöhe |
10-Gbit/s-NICs (Mellanox) |
2 |
Volle Bauhöhe |
25-Gbit/s-NICs (Mellanox) |
2 |
Volle Bauhöhe |
40-Gbit/s-NICs (Mellanox) |
2 |
Volle Bauhöhe |
100-Gbit/s-NICs (Mellanox) |
2 |
Volle Bauhöhe |
FC8 HBA (QLogic) |
2 |
Volle Bauhöhe |
FC16 HBA (QLogic) |
2 |
Volle Bauhöhe |
10-Gbit/s-NICs (QLogic) |
2 |
Volle Bauhöhe |
25-Gbit/s-NICs (QLogic) |
2 |
Volle Bauhöhe |
Omni-Path-HFI (Intel) |
2 |
Volle Bauhöhe |
10-Gbit/s-NICs (Solarflare) |
2 |
Volle Bauhöhe |
25-Gbit/s-NICs (Solarflare) |
2 |
Volle Bauhöhe |
1-Gbit-NIC (Broadcom) |
1 |
OCP |
10-Gbit-NIC (Broadcom) |
1 |
OCP |
25-Gbit-NIC (Broadcom) |
1 |
OCP |
HWRAID BOSS |
2 |
Volle Bauhöhe |
Tabelle 4. Riser-Konfigurationen: LP (Riser mit flachem Profil*1)Diese Tabelle enthält Informationen zur Steckplatzpriorität für die Riser-Konfiguration LP (Riser mit flachem Profil*1) des PowerEdge R440-Systems.
Kartentyp |
Steckplatzpriorität |
Formfaktor |
PERC9.14G (Foxconn) |
Integrierter Steckplatz |
Low-Profile |
HBA: Externer Adapter (Dell) |
3 |
Low-Profile |
RAID – PERC9.14G/PERC10 (intern) / PERC11 (Dell) |
Integrierter Steckplatz |
Low-Profile |
Nicht-RAID – PERC 11 (intern) (Dell) |
Integrierter Steckplatz |
Low-Profile |
Nicht-RAID – PERC 11 (extern) (Dell) |
3 |
Low-Profile |
PERC 10 externer Adapter (Dell) |
3 |
Low-Profile |
RAID PERC10 (extern) (Dell) |
3 |
Low-Profile |
NVMe-PCIe-SSD (Samsung, Intel) |
3 |
Low-Profile |
1-Gbit/s-NICs (Broadcom) |
3 |
Low-Profile |
10-Gbit/s-NICs (Broadcom) |
3 |
Low-Profile |
25-Gbit/s-NICs (Broadcom) |
3 |
Low-Profile |
1-Gbit/s-NICs (Intel) |
3 |
Low-Profile |
10-Gbit/s-NICs (Intel) |
3 |
Low-Profile |
25-Gbit/s-NICs (Intel) |
3 |
Low-Profile |
40-Gbit/s-NICs (Intel) |
3 |
Low-Profile |
FC8 HBA (Emulex) |
3 |
Low-Profile |
FC16 HBA (Emulex) |
3 |
Low-Profile |
InfiniBand-HCA-FDR (Mellanox) |
3 |
Low-Profile |
10-Gbit/s-NICs (Mellanox) |
3 |
Low-Profile |
25-Gbit/s-NICs (Mellanox) |
3 |
Low-Profile |
40-Gbit/s-NICs (Mellanox) |
3 |
Low-Profile |
100-Gbit/s-NICs (Mellanox) |
3 |
Low-Profile |
FC8 HBA (QLogic) |
3 |
Low-Profile |
FC16 HBA (QLogic) |
3 |
Low-Profile |
10-Gbit/s-NICs (QLogic) |
3 |
Low-Profile |
25-Gbit/s-NICs (QLogic) |
3 |
Low-Profile |
Omni-Path-HFI (Intel) |
3 |
Low-Profile |
10-Gbit/s-NICs (Solarflare) |
3 |
Low-Profile |
25-Gbit/s-NICs (Solarflare) |
3 |
Low-Profile |
1-Gbit-NIC (Broadcom) |
1 |
OCP |
10-Gbit-NIC (Broadcom) |
1 |
OCP |
25-Gbit-NIC (Broadcom) |
1 |
OCP |
HWRAID BOSS |
3 |
Low-Profile |
Tabelle 5. Riser-Konfigurationen: LP+LP (Riser mit flachem Profil*2)Diese Tabelle enthält Informationen zur Steckplatzpriorität für die Riser-Konfiguration LP+LP (Riser mit flachem Profil*2) des PowerEdge R440-Systems.
Kartentyp |
Steckplatzpriorität |
Formfaktor |
PERC9.14G (Foxconn) |
Integrierter Steckplatz |
Low-Profile |
HBA: Externer Adapter (Dell) |
3, 2 |
Low-Profile |
RAID – PERC9.14G/PERC10 (intern) / PERC11 (Dell) |
Integrierter Steckplatz |
Low-Profile |
Nicht-RAID – PERC 11 (intern) (Dell) |
Integrierter Steckplatz |
Low-Profile |
Nicht-RAID – PERC 11 (extern) (Dell) |
3, 2 |
Low-Profile |
PERC 10 externer Adapter (Dell) |
3, 2 |
Low-Profile |
RAID PERC10 (Extern) (Dell) |
3, 2 |
Low-Profile |
NVMe-PCIe-SSD (Samsung, Intel) |
3, 2 |
Low-Profile |
1-Gbit/s-NICs (Broadcom) |
3, 2 |
Low-Profile |
10-Gbit/s-NICs (Broadcom) |
3, 2 |
Low-Profile |
25-Gbit/s-NICs (Broadcom) |
3, 2 |
Low-Profile |
1-Gbit/s-NICs (Intel) |
3, 2 |
Low-Profile |
10-Gbit/s-NICs (Intel) |
3, 2 |
Low-Profile |
25-Gbit/s-NICs (Intel) |
3, 2 |
Low-Profile |
40-Gbit/s-NICs (Intel) |
3, 2 |
Low-Profile |
FC8 HBA (Emulex) |
3, 2 |
Low-Profile |
FC16 HBA (Emulex) |
3, 2 |
Low-Profile |
InfiniBand-HCA-FDR (Mellanox) |
3, 2 |
Low-Profile |
10-Gbit/s-NICs (Mellanox) |
3, 2 |
Low-Profile |
25-Gbit/s-NICs (Mellanox) |
3, 2 |
Low-Profile |
40-Gbit/s-NICs (Mellanox) |
3, 2 |
Low-Profile |
100-Gbit/s-NICs (Mellanox) |
3, 2 |
Low-Profile |
FC8 HBA (QLogic) |
3, 2 |
Low-Profile |
FC16 HBA (QLogic) |
3, 2 |
Low-Profile |
10-Gbit/s-NICs (QLogic) |
3, 2 |
Low-Profile |
25-Gbit/s-NICs (QLogic) |
3, 2 |
Low-Profile |
Omni-Path-HFI (Intel) |
3, 2 |
Low-Profile |
10-Gbit/s-NICs (Solarflare) |
3, 2 |
Low-Profile |
25-Gbit/s-NICs (Solarflare) |
3, 2 |
Low-Profile |
1-Gbit-NIC (Broadcom) |
1 |
OCP |
10-Gbit-NIC (Broadcom) |
1 |
OCP |
25-Gbit-NIC (Broadcom) |
1 |
OCP |
HWRAID BOSS |
3, 2 |
Low-Profile |
Tabelle 6. Riser-Konfigurationen: LP+LP+NVMe-Bridge (Riser mit flachem Profil*2)Diese Tabelle enthält Informationen zur Steckplatzpriorität für die Riser-Konfiguration LP+LP+NVMe-Bridge (Riser mit flachem Profil*2) des PowerEdge R440-Systems.
Kartentyp |
Steckplatzpriorität |
Formfaktor |
PERC9.14G (Foxconn) |
3 |
Low-Profile |
HBA: Externer Adapter (Dell) |
2 |
Low-Profile |
RAID – PERC9.14G/PERC10 (intern) / PERC11 (Dell) |
3 |
Low-Profile |
Nicht-RAID – PERC 11 (intern) (Dell) |
3 |
Low-Profile |
Nicht-RAID – PERC 11 (extern) (Dell) |
2 |
Low-Profile |
PERC 10 externer Adapter (Dell) |
2 |
Low-Profile |
RAID PERC10 (extern) (Dell) |
2 |
Low-Profile |
NVMe-PCIe-SSD (Samsung, Intel) |
2 |
Low-Profile |
1-Gbit/s-NICs (Broadcom) |
2 |
Low-Profile |
10-Gbit/s-NICs (Broadcom) |
2 |
Low-Profile |
25-Gbit/s-NICs (Broadcom) |
2 |
Low-Profile |
1-Gbit/s-NICs (Intel) |
2 |
Low-Profile |
10-Gbit/s-NICs (Intel) |
2 |
Low-Profile |
25-Gbit/s-NICs (Intel) |
2 |
Low-Profile |
40-Gbit/s-NICs (Intel) |
2 |
Low-Profile |
FC8 HBA (Emulex) |
2 |
Low-Profile |
FC16 HBA (Emulex) |
2 |
Low-Profile |
InfiniBand-HCA-FDR (Mellanox) |
2 |
Low-Profile |
10-Gbit/s-NICs (Mellanox) |
2 |
Low-Profile |
25-Gbit/s-NICs (Mellanox) |
2 |
Low-Profile |
40-Gbit/s-NICs (Mellanox) |
2 |
Low-Profile |
100-Gbit/s-NICs (Mellanox) |
2 |
Low-Profile |
FC8 HBA (QLogic) |
2 |
Low-Profile |
FC16 HBA (QLogic) |
2 |
Low-Profile |
10-Gbit/s-NICs (QLogic) |
2 |
Low-Profile |
25-Gbit/s-NICs (QLogic) |
2 |
Low-Profile |
Omni-Path-HFI (Intel) |
2 |
Low-Profile |
10-Gbit/s-NICs (Solarflare) |
2 |
Low-Profile |
25-Gbit/s-NICs (Solarflare) |
2 |
Low-Profile |
1-Gbit-NIC (Broadcom) |
1 |
OCP |
10-Gbit-NIC (Broadcom) |
1 |
OCP |
25-Gbit-NIC (Broadcom) |
1 |
OCP |
HWRAID BOSS |
2 |
Low-Profile |