Dell Boot Optimized Storage Solution-S1 User's Guide

PDF

Supported BOSS-S1 CLI commands

The following table lists the supported BOSS-S1 command line interface (CLI) commands. For more information about the commands, type > help.

NOTE The BOSS-S1 CLI utility only supports the following commands:

Table 1. Supported CLI commandsTable describes the supported CLI commands.
CLI commands	Description	Windows Usage	Linux / VMware Usage
info -o hba	Display BOSS-S1 controller information.	mvsetup info -o hba	./mvcli info -o hba
info -o vd	Display virtual drive information.	mvsetup info -o vd	./mvcli info -o vd
info -o pd	Display physical drive information.	mvsetup info -o pd	./mvcli info -o pd
smart -p <PD_ID>	Display SMART information of physical drive.	mvsetup smart -p 0	./mvcli smart -p 0
NOTE SMART reports the health status of the M.2 disks. Refer to the SMART status return once the command is executed.
event	Display controller events.	mvsetup event	./mvcli event
NOTE There may be inconsistency in the events that are listed in BOSS CLI and other management interfaces that include Dell Open Manage Storage Services.
flash	Enables you to perform controller firmware upgrade.	mvsetup flash -a update -f <image binary file> -t raw	./mvcli flash -a update -f <image binary file> -t raw
help	Details help for all commands or for only one command.	mvsetup help info	./mvcli help info