Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge R750 Installation and Service Manual

PDF

Removing a GPU

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions.
  2. Follow the procedure listed in the Before working inside your system.
  3. If applicable, disconnect the cables from the expansion card.
  4. Remove the GPU air shroud top cover.
  5. Remove the GPU air shroud filler.
  6. Remove the full length expansion card riser.

Steps

  1. To remove the GPU from Riser 1:
    1. Disconnect the GPU power cable from the GPU card.
    2. Open the expansion card holder latch on the riser.
    3. Press the tab, and pull the card holder from the riser.
    4. Hold the GPU card by the edges and pull the card from the riser.
    NOTE:The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
    Figure 1. Removing GPU from Riser 1
    This image shows removal of GPU 1
  2. To remove the GPU from Riser 4:
    1. Slide the expansion card latch on the riser.
    2. Disconnect the GPU power cable from the GPU card.
    3. Press the tab, and pull the card holder from the riser.
    4. Open the expansion card holder latch on the riser.
    5. Hold the GPU card by the edges and pull the card from the riser.
    Figure 2. Removing GPU from Riser 4
    This image shows removal of GPU 3 and 4
  3. If you are replacing the GPU permanently, install a filler bracket.
    NOTE:You must install a filler bracket over an empty expansion card slot to maintain Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system. The filler bracket is necessary to maintain proper thermal conditions.
  4. Install a metal filler bracket over the empty expansion slot opening and close the expansion card latch.
    Figure 3. Installing the metal filler bracket
    This image shows installing the metal filler bracket

Next steps

  1. Replace the GPU.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\