Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell EMC SmartFabric OS10 User Guide Release 10.5.2

PDF

show vlan private-vlan interface

Displays the PVLAN-specific details of an interface.

Syntax
show vlan private-vlan interface interface-name
Parameters
interface-name—Enter the interface information in node/slot/port[:subport] format.
Command Mode
EXEC
Usage Information
Use this command to verify information about the PVLAN-specific details of an interface. This command displays the VLAN ID associated with the interface.
Examples
OS10# show vlan private-vlan interface ethernet 1/1/11
Primary Secondary Type      Active Ports
------- --------- --------- ------ ---------
100               Primary   Yes    Eth1/1/11
101               Primary   Yes    Eth1/1/11
OS10# show vlan private-vlan interface ethernet 1/1/7

Primary Secondary Type      Active Ports
------- --------- --------- ------ ---------
        4002      Community Yes    Eth1/1/7
OS10# show vlan private-vlan interface ethernet 1/1/5

Primary Secondary Type      Active Ports
------- --------- --------- ------ --------
        4001      Isolated  Yes    Eth1/1/5
OS10# show vlan private-vlan interface port-channel 101
Primary Secondary Type      Active Ports
------- --------- --------- ------ -----------------------------
        10        Isolated  No     Po101
        20        Community No     Po101
        30        Community No     Po101
100               Primary   No     Po101
Supported Releases
10.5.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\