Dell Storage MD1420 Enclosures Hardware Owner's Manual

Troubleshooting enclosure connections

1. Verify that the EMM port link status LED and the EMM status LED are solid green for each port that is connected to a cable. If the LEDs are not solid green, see Enclosure Management Module.
2. Ensure that all the cables are attached correctly according to enclosure mode you selected. For more information about enclosure modes, see Dell Storage MD1400 and MD 1420 Enclosure Hardware Deployment Guide.
3. If you reseated cables, restart the host server.

   NOTE: : You must turn off the host server before reseating the cables on the enclosure.

   If the problem is not resolved, see Getting Help.